Facebook
Twitter
Google+
Instagram
YouTube
When you purchase a 10 Multi-Pack, you know you’re getting the lowest price ETD can offer on the HALO 4 compared to them being bought separately. Each light unit has 4 Generation IV 3-Watt LEDs that are made to last 100,000 hours which come in your choice of 5 solid colors or 3 split-color combinations. The tough, polycarbonate housing has an aluminum heat-resistant backing. The HALO 4, like the rest of the HALO Series, also has polycarbonate TIR lenses that stay bright and clear and don’t fog up. It has 22 flash patterns that ‘burst,’ ‘split,’ ‘alternate,’ ‘cycle flash’ and more. The California “Steady” meets that state’s requirements...and the HALO 4 has pattern memory, too! TIR lenses produce strong, steady focused beams that can be well seen by those approaching, keeping you safe while performing your duties. The remarkable HALO Series can be installed internally or externally on your vehicle, wherever there is a flat surface. Mount the HALO 4 on the dash or deck of your vehicle, or because they are sealed with high-tech epoxy and are 100% waterproof, mount them on any exterior flat surface (grille, bumpers, roof, or body) of your patrol car, SUV, or on whatever you drive. Mount flanges, gaskets, and hardware are included, and Halo 4’s are prewired making them easy to hardwire into an existing emergency light set up, or they can be wired separately to a switch.
Never worry about mounting the HALO 4 low or high on the exterior of your professional or volunteer unit because the lenses and housings are made of polycarbonate which can take a whole lot of rough use off road and on. Check out the extensive videos that our customers have sent in to us if you wonder how the HALO Series would look on your vehicle. Most often surface mounts are bought in pairs so they can be put opposite each other. If you plan to mount them yourself, be sure to read the Installation Guide in the Knowledge Base section of our website before you start!
- (4) 3-Watt Generation IV LEDs/Unit
- 22 Flash Patterns with Pattern Memory
- Multi-Purpose Interior/Exterior Surface Mount Light
- 100% Waterproof meets IP-67 Rating
- Meets or Exceeds SAE J845 & J595 Standards
- Meets or Exceeds California Title 13 Requirements
- 10 HALO 4
- 10 Surface Mount Flange
- 10 Rubber Gaskets
- 20 Screws
Warranty
We have one of the best warranties in the industry! This warranty includes:
- A 5 Year Limited Warranty on all LEDs used in our products
- A 2 Year Limited Warranty on all components
- A Full 90 Day Warranty for all Replacement Parts
For Complete Warranty Information: Read the Full Warranty Policy Here
Most orders will ship within 1-2 Business days of being received. We do ship via UPS or USPS whichever is determined to be the fastest to your location.
FREE Shipping Within The United States On Orders Over $88
Please call for International Shipping Costs
We have one of the best warranties in the industry! This warranty includes:
Order Total | Contiguous US | APO & FPO | International |
|---|---|---|---|
Up to $49.99 |
$5.99 |
$5.99 |
Call |
$50 - 87.99 |
$9.99 |
$9.99 |
Call |
$88.00 + |
FREE |
FREE |
Call |
Need your products faster or through another shipping company? Give us a call for any custom shipping requests. International orders may require additional shipping costs. We don’t expect back orders, but if they do happen, your partial order will likely ship first in order to get you going as quickly as possible.
For More Information: Read the Full Shipping Policy Here
We get it, things happen and you may need to return an item. Perhaps you bought the wrong color, or need a different size. We have an easy to use 30 Day Money Back Policy for most returns or exchanges. Need a return or exchange after that? Give us a call, or send an email to customerservice@extremetacticaldynamics.com with your issue and we will be more than happy to assist you as best we can!
For More Information: Read the Full Return Policy Here